FAQ
414-534-3302

How much does it cost to power wash your house?
Power washing typically costs between $183 to $380 in the U.S., with the national average being $281, according to Home Advisor. Power washing houses usually cost between $220 to $380, a driveway costs $130 to $220 and a deck or patio costs $250 to $420.

What should you not pressure wash?
Surfaces you should not try to power or pressure wash are:
Laminar sandstone – You’ll simply wash it away, or wash grooves in it. It’s too soft of material to power or pressure wash.
Anything painted – While painted items can be washed, it usually takes a pro to do it without destroying the paint.

What is the difference between power washing and pressure washing?
The main difference between power washing vs. pressure washing is the heat. The jet wash in a power washing machine uses heated water, whereas the water in a pressure washer is not heated. … The heated water makes it easier to clean surfaces — just as it does when doing dishes or washing your hands.

Is Power Washing good for your house?
In the right hands, pressure washing can be incredibly beneficial to your home. When used at the proper levels, pressure washing can clean your house of grime, bird droppings, and unsightly stains. … Pressure washing removes mold and mildew, which are damaging to both your home and the health of your family.

How long does it take to pressure wash a house?
About 30 minutes to 2 hours. The amount of time it takes to pressure wash a typical house ranges from about 30 minutes to 2 hours. An additional 15 to 30 minutes of setup and breakdown time is also needed. Pressure washing has two parts – applying the cleaning liquids and then rinsing (pressure washing) the exterior.

Should you wear a mask while pressure washing?
Wear protective gear including long pants, close-toed footwear, and some kind of face mask while pressure washing. … Avoid using a ladder while pressure washing, as this could lead to fatal injuries.

How can I clean my house without a pressure washer?
Recommended three gallons of water or a little bit of soap.

Why you should not pressure wash your house?
The power of pressure washing can result in holes in your siding, breaking off vinyl panels, and more. When you’re using a pressure washer, you’re likely shooting water up toward the top of your house. … Rotting can also occur if water seeps behind the panels, which can be highly damaging to wood exterior.

Is it OK to pressure wash a brick house?
Don’t Use High-Pressure Power Washing Pressure washers can damage the surface of an entire brick house. You cannot pressure wash brick on high-pressure settings. It may take a couple of years for you to realize that the brick was damaged.

How many PSI Do I need to clean concrete?
3000 psi… To clean concrete effectively, use a power washer with a pressure rating of at least 3000 psi and a flow rate of at least 4 gallons per minute (gpm).

Do I need soap to pressure wash my driveway?
Use a detergent… Concrete detergent is incredibly effective, helps remove stubborn oil, paint and dirt stains. You may also try Zep Driveway & Concrete Pressure Wash detergent, but many great options are available.

What is the best time of year to pressure wash your house?
A warm, sunny day is the best time of year to pressure wash your house. The warm sun will be able to dry out the house after washing. You should also consider pressure washing your home after the rainy, storm season has passed. Depending on where you live, this might be in the spring, summer or early fall.

Is it worth it to hire a professional pressure washer?
Yes, it’s often worth it to hire a pro to pressure wash your house or other surfaces. The main benefits of hiring a professional pressure washer include the pro’s ability to clean without damaging your home (removing the risk for personal injury) and their ability to spot problems before they occur. 

With DIY pressure washing, you can save money and get familiar with your house’s nooks and crannies. However, you run the risk of damaging your siding and your paint, falling off a ladder, hurting yourself with the high-pressure water and not spotting problems that an experienced pro would be able to spot.

How much does pressure washing cost per square foot?
The cost of hiring a pressure washer will depend on the square footage of your home, which translates to the square footage of your exterior walls. In general, expect to pay around $0.10-$0.17 per square foot of your property size.

Ask the professional how much they charge per square foot of the surface itself. This can be helpful in estimating the cost to pressure wash driveways, decks, patios, and fences.

You Deserve The Best…
So Hire The Best!
414-534-3302

Whatever your pressure washing needs are, Cedarburg Pressure Washing is your answer. We will professionally pressure clean your decks & patios, driveways, entryways, your homes including windows, sheds & your business storefront.

Cedarburg Pressure Washing is a local veteran-owned business that also services Grafton, West Bend, Germantown, Menomonee Falls, Saukville, Port Washington, Jackson & Hartford.